Skip to content
Guides

Invoice processing automation: what AI reads and what a person checks

Vetrox · Published

The short answer

Send every supplier invoice to one inbox, let AI read the fields your accounting software needs, and let plain rules run the checks that have one right answer: the ABN is active, the invoice is not a duplicate, the totals add up and it matches the order. A person then checks only what is flagged, and confirms any new supplier or change of bank details by phone before anything is paid. Suppliers who can send eInvoices skip the reading altogether, because their invoices arrive as data.

What can be automated, and what stays with a person

A supplier invoice usually arrives as a PDF attached to an email. Someone opens it, types the supplier, invoice number, dates and amounts into the accounting software, checks it against what was ordered, gets it approved and pays it. The typing is the part AI does well. The National AI Centre lists invoice and receipt processing (opens in a new tab) among the ways businesses use AI: it reads scanned or uploaded invoices, extracts details such as the supplier name, date and totals, and suggests account coding for staff to review and approve.

The rest of the job splits in two. Some checks have one right answer every time, such as whether the ABN is active or whether the invoice was already entered last week, and a plain rule does them more reliably than AI. Other steps are decisions that belong to a person: paying a new supplier, accepting new bank details and approving the spend. A flow that keeps those three kinds of work apart looks like this:

One supplier invoice, from the inbox to the accounting software

  1. 1

    It arrives in one inbox

    Every supplier sends to the same address

  2. 2

    AI reads it

    Supplier, ABN, invoice number, dates and amounts

  3. 3

    Rules check it

    ABN, duplicates, totals and the order

  4. 4

    A person checks what is flagged

    Unsure fields, new suppliers, changed bank details

  5. 5

    A draft bill is saved

    With the original invoice attached

  6. 6

    A person approves the payment

    In the accounting software, not by the AI

AI does the reading, rules run the checks with one right answer, and people make the decisions. The sections below take the steps in turn.

Start with one inbox, and see what your software already does

Invoices sent to whoever placed the order end up scattered across personal inboxes, and nothing can be automated until they arrive in one place. Pick one address for supplier invoices, such as a shared accounts mailbox, put it on every purchase order and supplier record, and ask suppliers to use it.

Then look at what your accounting software already includes, because the common ones read invoices themselves. Xero gives each organisation its own address for bills: an invoice emailed to it becomes a draft bill with the document attached (opens in a new tab), with the contact, date, total, due date, reference and description filled in when Xero can read the document. A supplier that is not yet a contact in Xero comes in without one, to be set before the bill is approved. Xero recommends not sharing that address outside your organisation; a rule in your own mailbox can forward bills to it instead. MYOB gives each business its own uploads email address (opens in a new tab) and pre-fills details such as the supplier, due date and amount, showing the document and the new bill side by side for someone to check.

For many businesses with regular suppliers, that is enough. A flow of your own is worth building when the built-in reading stops short: you need every line, not just the total; invoices have to match purchase orders or jobs in another system; who approves depends on the amount or the project; or the checks below have to run before a bill exists. That flow sits between the inbox and the accounting software and writes each bill through the software's API, as our guide to connecting the systems you already use describes.

What AI reads from an invoice

Decide the fields first. The Australian Taxation Office (ATO) lists what a tax invoice (opens in a new tab) must make clear, and it makes a good starting list:

  • that the document is intended to be a tax invoice
  • the seller's identity and Australian business number (ABN)
  • the date it was issued
  • a brief description of what was sold, with the quantity and the price
  • the GST amount, if any, and how much of each sale is taxable
  • above a set amount, the buyer's identity or ABN as well.

Add what your own process needs, such as the invoice number, due date, purchase order number and the supplier's bank details. The bank details are read only to compare with the supplier record, never to change it, for reasons covered below.

Have the AI hand back each field with a sign of how sure it is. The National AI Centre's advice for extracting information from documents (opens in a new tab) is to flag low-confidence extractions for a staff member to check and correct, to start with one document type such as supplier invoices, to define the fields and validation rules, and to measure accuracy on a sample of real documents before rolling out. Choose the AI service as you would any service that holds business data: our guide to AI for business covers what to look for in its terms.

Test it on a month or two of your own invoices, including the awkward ones: multi-page invoices, scans, credit notes, invoices in another currency or language, and supplier statements and payment reminders, which look like invoices but must never become new bills.

A missing field is worth catching early. The ATO says an invoice with incorrect or incomplete information is not a valid tax invoice (opens in a new tab), and for any purchase above a small amount it sets, you need a valid one to claim the GST credit. You can ask the supplier for a correct one, they have 28 days from your request to provide it, and the ATO says to wait until you have it before claiming, even if that falls in a later reporting period.

The checks a plain rule does better than AI

Checks with one right answer should not rest on an AI's judgement. Run them as rules, the same way on every invoice, and send anything that fails to a person:

  • the ABN is active, and the supplier is registered for GST if the invoice charges GST: ABN Lookup (opens in a new tab) shows whether an ABN is active or cancelled and its GST status, and the ATO tells businesses claiming GST credits to make sure their suppliers are registered for GST (opens in a new tab)
  • the invoice is not already in the system: the same supplier and invoice number, or the same amount on the same date, arriving twice
  • the lines add up to the total, and the GST matches the lines
  • it matches a purchase order or a delivery, where you use them, and does not exceed what was ordered
  • the supplier is already in your records; if not, it is a new supplier, and that is a decision for a person.

ABN Lookup's web services (opens in a new tab) let a system run that check by itself: access is free once you register, and the uses it lists include validating ABNs and keeping the ABN details in your own records up to date.

An invoice with no ABN is a hold, not a guess. If a supplier does not provide an ABN, the ATO says you generally withhold the top rate of tax (opens in a new tab) from the payment and pay it to the ATO, apart from small amounts and some payments that are exempt, and you must not pay in full on the understanding that an ABN will be quoted later. Your accountant can confirm which applies.

An ABN on the page also proves less than it seems. Scamwatch, the government's scam warning site, says scammers copy business logos and ABNs (opens in a new tab) to make fake invoices look real. A valid ABN tells you the business exists, not that this invoice came from it.

What a person checks before anything is paid

The riskiest field on an invoice is the bank account. In a fake invoice scam, Scamwatch explains, scammers pose as a business you have recently dealt with and send an invoice with changed payment details (opens in a new tab), sometimes from the real business's email account and in the same thread as its earlier emails, and if you reply to ask about the change, the scammer answers. AI reads a fake invoice as easily as a real one.

So the payment always goes to the account already in your supplier record. When the bank details on an invoice differ from it, the invoice stops, and a person calls the supplier on a number found independently, not one from the email. The Australian Cyber Security Centre (ACSC) gives the same advice: be cautious of unexpected requests involving payments or bank account changes (opens in a new tab), and verify them through a trusted channel such as a known phone number. Our guide to approval workflows covers handling a bank detail change as a request of its own.

A person also looks at:

  • every field the AI was unsure of, and every invoice that failed a rule
  • new suppliers, set up by someone other than the person who approves their invoices
  • the approval itself, by whoever holds the budget, with larger amounts going to a second approver.

Keep the AI on the reading side of that line. The National AI Centre's guide to agentic AI (opens in a new tab), published in October 2026, says to pause and get advice before an AI system can access or act on bank accounts and payment systems, or on orders, invoices and refunds, and that giving it that access needs stronger checks, clear responsibility and a way to stop or reverse actions. In practice, the AI drafts the bill, and a person approves the bill and the payment.

eInvoicing skips the reading

The easiest invoice to process is one nobody has to read. eInvoicing is the digital exchange of invoice information between suppliers' and buyers' software (opens in a new tab) through the Peppol network, so the buyer does not type or scan anything. The ATO, which is Australia's Peppol authority, says over 430,000 Australian businesses are on the network, and that the risks of intercepted, fake or compromised invoices and email scams are lower than with emailed invoices. You still apply your usual checks before paying.

Many of the commonly used small business accounting packages already offer it, and the ATO's getting started page for small business (opens in a new tab) links to the steps for Xero, MYOB, Reckon and others. For bringing suppliers across (opens in a new tab), it suggests trying a small number first, then moving on to those with the most benefit, such as high-volume suppliers or those with a high error rate. Every supplier who switches is one fewer PDF for the AI to read.

Keep the original with the bill

An invoice is a tax record, and the ATO's record-keeping rules (opens in a new tab) apply to it: keep most records for 5 years, store them so the information cannot be changed, be able to reconstruct the original data if your system changes, and keep records in English or in a form easily converted to English. The ATO adds that the Australian Securities and Investments Commission requires companies to keep records for 7 years, and GST records (opens in a new tab), tax invoices included, are also kept for 5 years.

In an automated flow, that means:

  • the original file stays attached to the bill, as Xero and MYOB both do when they create one
  • what the AI read, what a person corrected and who approved it are kept with the bill
  • an invoice in another language keeps its original beside the English fields.

Where Vetrox fits

Vetrox is an Australian IT company that builds AI document processing into the systems businesses across Australia already use, and supplier invoices are one of the usual places to start. The AI hands back plain fields, they are checked against your rules before anything is saved, and anything the AI is unsure of waits for a person. Each connection is written directly against your systems' own APIs, Xero's included, and the AI runs on business plans and APIs whose terms say your data is not used to train the models. Every run is logged with what the AI read and returned, and a failure reaches a person instead of failing quietly. Our AI consulting starts from where the hours go, and if the bill inbox in your accounting software or a plain automation would do the job, the written shortlist says so.

Sources

  1. National AI Centre: Explore ways to use AI (opens in a new tab)
  2. Xero Central: Email bills to your Xero organisation (opens in a new tab)
  3. MYOB: Working with uploaded documents (opens in a new tab)
  4. Australian Taxation Office: Tax invoices (updated 18 September 2026) (opens in a new tab)
  5. Australian Taxation Office: When you can claim a GST credit (updated 14 September 2026) (opens in a new tab)
  6. Australian Business Register: ABN Lookup (opens in a new tab)
  7. Australian Business Register: ABN Lookup web services (opens in a new tab)
  8. Australian Taxation Office: Withholding if ABN is not provided (updated 11 June 2025) (opens in a new tab)
  9. Scamwatch: Scam alert, fake business invoice scams (4 April 2024) (opens in a new tab)
  10. Australian Cyber Security Centre: Small business cyber security handbook, Common cyber threats to small businesses (published 7 October 2026) (opens in a new tab)
  11. National AI Centre: Understanding and using agentic AI (October 2026) (opens in a new tab)
  12. Australian Taxation Office: About Peppol eInvoicing (updated 2 November 2026) (opens in a new tab)
  13. Australian Taxation Office: Getting started with eInvoicing for small business (updated 3 September 2026) (opens in a new tab)
  14. Australian Taxation Office: eInvoicing for businesses (updated 8 October 2025) (opens in a new tab)
  15. Australian Taxation Office: Overview of record-keeping rules for business (updated 18 June 2026) (opens in a new tab)
  16. Australian Taxation Office: GST records, business (updated 28 November 2019) (opens in a new tab)

Show us how your business runs today.

A 30-minute call to discuss the software you use, the work it handles and what needs to change.